How to choose all aluminum doors?

Do you have a bad choice of door?

1. Fine carving aluminum plate: Fine carving aluminum plate uses a whole piece of aluminum plate for whole plate carving. adopt CNC engraving technology, engraving accuracy up to 0.03mm, so the pattern is more delicate and natural. 🪞 fine carved aluminum pattern can be customized, the size can be adjusted according to the size of the door, so it is more in line with the current trend of personalized customization.

2, casting aluminum plate: the aluminum plate of the cast aluminum door is made in advance of the mold, cast in aluminum water molding, cooling molding for later grinding, coloring and other processes. The cast aluminum plate is poured out once, the pattern is also a molding, and it can not be changed at will in the later period, and it is also prone to porosity. But also because the pattern is cast, its thickness is thicker, the three-dimensional sense is stronger, and it looks very atmospheric and thick.

3, molded aluminum plate: The use of 2mm thickness of the whole aluminum plate, pressed out of the large punching machine, relatively thin, the pattern needs to be selected according to the style of the mold.

4. There are card edges:
The card edge is called Carmen, which is the process of jamming the door panel by the card strip. According to the width and narrowness of the card strip, it is divided into wide side, narrow side and extremely narrow side. The large card edge is suitable for the door with a large door area, which can make the door body more firm and the door as a whole looks more atmospheric and stable. As the name suggests, the narrow edge is very narrow, suitable for light luxury air door, so that the door panel is more solid at the same time, the style is simple and generous.

5, no card edge: aluminum plate directly glued on the door body, you can see the thickness of aluminum plate intuitively, compare the test of the manufacturer's gluing process, must be glued flat, seamless, can not dew glue, so the labor cost will be higher. No card edge process is a young style, light luxury and simple style that has become popular in recent years.

6, 2mm thickness of aluminum plate because too thin, can not do fine carving process. It is made into a molding process and pressed out on a large punching machine, which is relatively thin, and the pattern needs to be selected according to the style of the mold. Only the aluminum plate above 2mm can be made of fine carving process, but it can not be made of molding process.

7, more than 4mm thickness of the plate can be carved with CNC engraving machine to carve out any style, style. The cost and labor are slightly expensive, and some complex guest cases need to be carved one day and one night, so the construction period is long.